If the ceiling or lounge do not rise above their respective thermostat set points, then no air will be circulated. As this is not always desirable we have allowed for automatic circulation times to be set. These are covered in the next three sections.
As before our starting point is the default screen, which will be similar to the images below. You may notice in the middle image, that boost is set. The "C" next to it indicates that circulation is set on as well.

Press the info key (key 7). You are now in the main menu, and the screen will be the same as the image below.

Press the down arrow key (key 6) three times. As before you may press the up or down arrow keys to scroll through all the menu items. The screen will be now be the same as the image below.

Press the right arrow key (key 5). In the event that circulation was off, the screen will be the same as the image below. If you are turning boost off, then "Now:" will be "On", and "Set:" will be "Off".

Pressing the up arrow key (key 4), will toggle the "Set:" parameter. i.e. If like the image above it is reading "On", pressing the up arrow key will set it to "Off". When you have the desired setting press the enter key (key 8), and the setting will be accepted, and you will be returned to the main menu.
If you have changed your mind, pressing the left arrow key (key 3), will return you to the main menu without changing the circulation setting.

You can now press the left arrow key again to return to the default screen, or press the up, or down arrow keys to select a different menu item.